Input Regulation +15% to -20%, Output
Regulation ±5%

Input Regulation +15% to -20%, Output
Regulation ±2.5%

Input Regulation +15% to -20%, Output Regulation ±1.5%


Input Regulation +15% to -20%, Output Regulation ±1%

 


    
  The voltage stabilizer and line conditioner or be known by the name of “STABILIZER” is an equipment for adjusting voltage into available range, before supply to application. Even if input voltage fluctuate for example; it specifies input voltage 380/220 V, regulation +15% to -20%, and output voltage 380/220 V, regulation ±5% , that means input voltage into stabilizer would change up-down estimate 176 to 253 V. The stabilizer could control output voltage at ±11 V or estimate 209 to 231 V all the time.

     The suppressor protection unit can protect surge occurrence when blackout and then restore suddenly, also protect all kind of EMI, RFI, Noise, Surge and Spike Voltage.

Selection guide of Stabilizer for suitable       application:

    
Taking the stabilizer for application to make more efficiency of power quality, should make sure what type of the equipment, machine or electronic are current use and how accuracy are they need? For example; if for general equipment or electronic instrument, should select voltage stabilizer that specifies output regulation not less than ±5% that is enough to operate for them. But for scientific equipment, medical equipment, analysis equipment or laboratory equipment, which the operation system need the highest accuracy then should select voltage stabilizer that specifies output regulation not less than ±2.5% or better than as ±1.5%, ±1% or too less value too more accurate control.

    How ever, selection guide of stabilizer for application should consider more details and more characteristic. But important factor to consider is operation system or voltage stabilization system. Because nowadays there is some manufacturer and distributor who imported the low cost stabilizer-servo system from China. But servo system characteristic is known by engineer group that the operation system is slower than other type and when the stabilizer is operating, it is also generate line disturbance. Therefore, it is unsuitable application for high sensitive of equipment, machine and electronic instrument, but suit to apply for lighting system, cooling system or general electric appliance, which not assembles high sensitive electronic circuit.     
 


Silicon Power Supply Co., Ltd. 455/13-16 Soi Phibunuppatham, Latphrao Road, Samsennok, Huaykwang, Bangkok 10320
Tel: +66 2275 1182, +66 2275 1275, +66 2275 7161, +66 2276 9973 Fax: +66 2275 7309
 E-mail : info@siliconthai.com
Copyright 1997-2011 Silicon Power Supply All right reserved